發(fā)布時(shí)間:2023-10-11 人氣:714
For two piece cans, three cans and other metal packaging products (easy open end canned food), a new model for sterilization kettle has more obvious advantage.
For ordinary two piece cans and three cans packaging products, circulating water is always difficult to flow uniformly and consistently through each tank when spraying with water. In order to solve this problem, it is usually necessary to increase the flow of pumps. And the new model of autoclave, because the heat distribution effect is very good. Therefore, the flow rate of the circulating pump can be reduced by about 30%.
It is difficult for the ordinary retort to achieve uniform heat distribution at the heating stage for the two tank packed products with nitrogen. It is necessary to increase and decrease 2~3 times of heat preservation section in the heating stage to eliminate the uneven temperature rising of the product in each part of the sterilization kettle. When the temperature rises a little, the temperature will be suspended, so that the temperature of the product will catch up slowly, but this will affect the production efficiency of the retort. And the new type of sterilization kettle, because in the heating stage, the product temperature in the sterilization kettle almost all in a very small range, so you can achieve the fastest heating rate.
For larger size metal cans packaging products, the new model autoclave more uniform heat distribution effect, the control accuracy of higher temperature pressure curve, will be conducive to improve product quality.
Dongguan Anlian Packing Products Co., Ltd, meets the national food grade security and produces all kinds of easy open end, tinplate easy open end, aluminum easy open lid, tin lid, aluminum foil peel off end, drink easy open end and so on.